Finance (Financials)

4330 Topics

RLGroenerDo Gooder (Partner)

Recreate reminder proposal

Good day All, Is it possible to recreate / resend a reminder proposal? A reminder proposal is created and the output media is Printout. The proposal is fully accepted. The proposals must not be printed out but must be mailed to the customers. How can these proposals be send to the customer via e-mail? Do these have to be cancelled and created agian or is there an other way? Kind regards, Raymond

3 years ago

jdowneyDo Gooder (Customer)

asked in Finance (Financials)

Parallel Currency in GL not in Balance

I am trying to close 2018 in Apps 9 for a company with the main currency of GBP, but the parallel currency is USD. I’m off $1.50 - which I believe is just a rounding issue. I cannot close the year, because I’m not in balance. Does anyone know how to correct it?

3 years ago

kadoryDo Gooder (Partner)

asked in Finance (Financials)

Payment methods

Hi, I’d like to create a new payment detail in Payment Methods, and in the Formad ID area there are only a few candidates I can pick up(Pic.1), while I’ve already copyed and created a new line in Payment Formats(Pic.2) What should I do in the next?Thanks! Best Regards

3 years ago

Lawrence GSidekick (Customer)

asked in Finance (Financials)

Clear FX difference

Hi, In a foreign currency supplier account, the invoice was entered at one rate, but was paid at a different rate on later date. The foreign currency amount clears off fine, but in the Supplier account, it is leaving a balance in the home currency. What would be the best way to write off this difference to bring the account down to $0 balance in both foreign currency and home currency? Thanks in advance, Lawrence

3 years ago

LahiruDSidekick (Partner)

asked in Finance (Financials)

Project Completion And Object Connection

Hi Guys, I am facing an issue in Apps 10 where an Fixed Asset created through a Project cannot be moved, sell or scrap..etc. It gives error saying the project is completed. The setup was as follows. GP3 Account for Project and Acquisition Account for Object is same Reposted to same account When Project was completed, the object was moved by removing the Project code part. In here reposting debit entry was created without Project Eg ACC01 - OBJ01 DR XXX ACC01 - PROJ01-OBJ01 CR XXX Is it wrong to use GP3 Account for Project and Acquisition Account for Object as same ? What is the way to get rid of this flowstopper? Cheers Lahiru

3 years ago

MatthewSidekick (Customer)

asked in Finance (Financials)

Re-print remittance

Hi - We are looking in Apps 9 to reprint a supplier remittance advice (Supplier Payment) from 3-4 months ago. We Can not find them in Report or PDF Archive. Is it possible? Thanks, Matthew

4 years ago

MiguelSidekick (Customer)

asked in Finance (Financials)

Multi Company Project Reporting (MCPR) and tax codes

Dear IFS experts We have been trying to go live with the MCPR functionality in IFS for a while. It has been an interesting project. We are facing a potential issue at the moment. Recently, we modified our customer tax codes because of the Making Tax Digital (MTD) initiative and now we are having issues with MCPR when we test the functionality between UK and France companies. Our company in France is not setup with a E2 tax code but we use this code in UK. We are wondering if the tax codes have to match for all companies in MCPR or if there is another way to deal with this. Your advice will be very much welcome. Regards Miguel

4 years ago

zhairDo Gooder

asked in Finance (Financials)

Error Vouchers Relating To IP5 Posting Control?

We have 215 vouchers sat in error that have not passed through to our General Ledger. All of the errors relate to Manual supplier invoices created by numerous users on or after 16th December. The same update error of “The Obj Connect Lu Transform object does not exist” relating to an IP5 posting control. We are not aware of any changes to our system, so are totally baffled as to it’s cause. Has anyone got a clue how to resolve this or had a similar issue ? Regards,

4 years ago

bedgarDo Gooder (Customer)

asked in Finance (Financials)

create a batch of selected customers and generate PDF statements

How do you pick a list of customers and create a batch job to generate PDF statements of account and save the files to a specified location

4 years ago

HarshaK

asked in Finance (Financials)

Daily Collection Report

Hi All, Is there any standard ifs overview window or report to see the daily customer payments?

4 years ago

jokasperSidekick (Customer)

asked in Finance (Financials)

Cost on Business Opportunity Line

Our 12 offices have just upgraded form UPD4 to UPD7 and just found out that in UPD5 that a change was made on the Business Opportunity Line that the cost cannot be changed on an inventory item. Once IFS recognizes the part, the cost is pulled and the user cannot change it. Has anyone else run into this where it is a show stopper for your organization? Our costs can vary depending on the source, depending on the quantity ordered or any deals we may have with certain customers. So it’s common practice for us to adjust the cost for our parts. Just curious if we are alone with this obstacle. Thanks

4 years ago

roshanFDo Gooder (Partner)

asked in Finance (Financials)

GL Automatic Posting Rules

Hello, Is there any documentation about how to set up & use GL Automatic Posting Rules. Highly appreciate any guidance, suggestions, tips on how to set up system to create transactions automatically on the basis of an original transaction.

4 years ago

cperdueHero (Partner)

asked in Finance (Financials)

HCM - position ID

Via help I have been attempting to use the graphical structure to define positions but within that structure, a position ID is required before it can save. What am I missing?

4 years ago

rcanningDo Gooder (Customer)

asked in Finance (Financials)

AP AR netting

We are using APPS9. Is anyone using the AP/AR netting functionality? We want to start using the netting process but we are trying to figure out how to let the supplier know that we have netted one of their AR invoices against their AP check. We would like to identify, the AR invoice that was used in the offset, on the supplier remittance advice without having to do it manually so that the supplier is aware that the netting has taken place. Any suggestions would be greatly appreciated. Thanks Rob

4 years ago

LauriSidekick (Customer)

asked in Finance (Financials)

Reopening cancelled Customer Order

Hi IFS Community Members, We are using staged billing profiles in customer order lines. Due to the size and complexity of our projects, there may be more than 20 staged billing lines per profile. Recently a customer order line was cancelled accidentally while the staged billing profile still had both invoiced, uninvoiced and open staged billing lines. Because the cancelled order line wast the last one in the order the entire customer order changed to cancelled. Instead of creating a completely new customer order, we would like to utilize the exiting customer order and the exiting staged billing profile. What we’d like to hear is: is there a any way to reopen a cancelled customer order/order line is it possible to prevent customer order cancellation if it has uninvoiced staged billing lines For reference, we are using IFS 9 and update 14. Many thanks in advance, Lauri

4 years ago

PamithKSidekick (Partner)

asked in Finance (Financials)

Business Reporter: Column Repeater with Year-to-Date Value

Hi, I have created a report which the ‘GL Balance’ column is set as a repeater and with ‘Year’ being the input, it shows each period correctly. Now I need to show the Year-to-Date value in the each repeating period. I am not sure how to give this logic in the column filter as it is the repeater that determined the bottom period. The customer is using IFS V10 UPD6. Any ideas? Thank you - Pamith

4 years ago

MirjaKSidekick (Customer)

asked in Finance (Financials)

Sending customer invoice automatic when shipment is closed

I have not find the correct set up to get customer invoice sent automatic when shipment is closed. I have modify the order type like this: And then set up in the customer misc customer info the email option to invoice Now it seems that system stop the flow totally after shipment flow process and not proceed to invoicing. We are working in IFS10. What set up is missing?

4 years ago

FPayabSidekick (Partner)

asked in Finance (Financials)

Customer Account Statement (6 Months)

We have a Customer Account Statement which runs at the end of each month to send a PDF customer statement, is there a way to include the account details for last 6 months in this customer account statement.

4 years ago

MarieSkoldenborgSidekick (Customer)

asked in Finance (Financials)

Load voucher files in SIE format?

Our external payroll administration company sends voucher information in SIE format, which is a standard file format in Sweden for accounting transactions. Is there a possibility in IFS to receive external vouchers in SIE format? The SIE format is a HTML file and this far we have only found it is possible to import external vouchers from text files.

4 years ago

MKG019Hero (Partner)

asked in Finance (Financials)

Currency Revaluation Account delete error

Hi, Facing an issue while deleting one of Currency revaluation account which is used in previous month revaluation. If we rolled back all the currency revaluation transactions and then delete the transaction line and then delete any account from currency revaluations accounts screen it will allow to delete but this is not the good solution. In IFS V10 UPD it throws error can not be deleted as it used in table, we did not have any such issue in IFS 8. Ideally it should allow you to delete the account from currency revaluation account screen if we don't want certain account to revalued from crentain period then system not stop at all e.g loan account etc. Regards, Mukesh Gupta

4 years ago

HarshaK

asked in Finance (Financials)

Automatically Fill Fields with default Value

Hi, Re Voucher entry Window, Whenever user click on add button I want to fill Voucher status automatically as “Approved”. What are the ways I can achieve this ?

4 years ago

jbernardoHero (Partner)

asked in Finance (Financials)

Part Pricing Rule not triggering

This issue happens rarely but when it does it un-explainable. The part list price is in the part record the part list price is also in the part pricing rule that generates however, on the request it doesnt trigger anything the first screenshot shows part pricing triggering successfully. you can see the price rule sequence The one with the issue isnt pulling it at all

4 years ago

MKG019Hero (Partner)

asked in Finance (Financials)

External Payments

Hi , I have made the set up for external payments upload for Customer payment invoice matching but all the upload is going to parkpayment anf unable to genrate mathing based on the external payment parameters setup. I am trying to upload customer payment on mixed payment. 1. 2. 3. Mixed Payment file 1_HEAD;;JOD;16-03-2020;;; 2_DETAIL;;;16-03-2020;2548;;20ACT00115 4 I am using IFS V10 UPD3 it workis well in IFS 8 Regards, Mukesh Gupta

4 years ago

kadoryDo Gooder (Partner)

asked in Finance (Financials)

customer payment & supplier payment in Aurena

Hello, in IFS app 10 Aurena, where is menu node of customer payment & supplier payment in AR & AP model? I can’t find them in Aurena while they are available in EE. HELP me find that, thank you so much

4 years ago

hhy38Hero (Customer)

asked in Finance (Financials)

About Purchase Invoice Price Difference

Hi, How can we invoice for the price difference to purchase invoice? Does anybody know?

4 years ago

Page 171 / 174

Badges

Sign up

Login to the community

Scanning file for viruses.

This file cannot be downloaded