@AstSuzanE Yes of course. It is a simple calculation about the accumulated parameters. Actually, I did not get any warning message in the application when we are taking the measurements for the accumulated parameters. But if you go to the Maintenance Plan you can see all the due values on the PM action.These are things can be happened here,The object parameter is updated with the last measured value. If delta value is recorded, it is added to the previous Recorded Reading and the new Recorded Value and Total Value are calculated. If the result of the measurement falls outside of the limits defined for condition-based PM generation, it will also be displayed under the PM action to which the parameter is connected. If two or more accumulated measurements are registered and a PM action is registered, it generates a condition based forecast PM plan. If the measured value fails validation, the measurement is still saved, but with the Preliminary Reading measurement type. This reading will n
@AstSuzanEHi,For the Accumulated type parameters, will be able to find out “Last delta Value” as a calculation. If you will enter delta value, then system will calculate the Last Value as well. Hope this would help.Thanks
@SSkinnerHi, I just want to clarify below things.Is this about academy training of the Asset Operations and Maintenance? And if yes when you participated for that training session?ThanksDimuthu
@Timmermans Roel Hi,If you defined Classification organizations/Classification Codes, you will be able to connect them to Equipment objects using the below assistant. Then you can see the Classifications in the “Functional Object Has” is set to “Yes”.This classification organization can be used in the below page, and it will be easy to search objects/related work task using this classification organization/codes. Hope this will help.
Hi@ttzeleznik It is not possible to register time for the past after the terminated. Ex: Let us say if you have terminated on 1st of April 2024 and you try to report time for that employee on 10th April 2024 through the Report Time assistant then the system will give an error message “Employee is not valid”.Thanks
Hi @KAMANUK Just tested in demo environment and can divide to several visits.What is the cloud version?Test steps.Create a work task with duration 12 hours and minimum visit duration 4 hours. Enable multiple visit toggle and go to Assign assistant. Create a direct assignment. Go to Assignment tab and you will have single line. Release the Work Task and Accepted the assignment. You will have multiple lines for the visit chain. Hope this will help. http://clouddocs/ifsdoc/24R1/Documentation/en/WorkProcessing/AboutMultipleVisitHandling.htm If need more information please follow the documentation.
Hi @dfsjmarchant You need to delete first line under the Resource Capacity. Then you will be able to delete the Site. Hope this will help.
Hi @jenjen0510 When you are issuing Inventory Part it will create a Cost line and you can see Transaction Source is Inventory and Transactions Status is Not Applicable. It is not necessary to authorize. Also, you can see Inventory Transaction has been created [Inventory Transaction ID] on the material line. You can use Transfer Inventory Transaction to transfer the inventory transaction to the financials. But if you are working with No Part, Non-Inventory Part the process is bit different. Cost lines will be created at the arrival. Transaction Status will be Not Applicable initially but when you invoiced, it will be Overtaken. The Transaction Source will be External Purchase. you can execute a reposting to transfer external purchases.Then you can navigate to the Conclude WO page, under Cost tab you will be able to see all details.Hope this will help.
Hi @Harm de Brouwer 12Guide What is the IFS Cloud version? What are the steps you have followed to add WO map position?
Hi @Miruna M You need to enable “Multiple Visit” for the particular WT. Plan some resource and allocate it. Accept the Work Assignment and then you can see the multiple allocations under the Assignment tab according to schedule. Start some work assignment. If you want to modify time you can use this “Modify Time to Complete” option. [Optional] Then try to Complete the Work Assignment and there you can find this assistant. Hope this will help you.Thank You
Hi,That means the required work has not been completed yet. Because, you have added 1 hour as the time duration on the Work Task. Then you started the Work assignment at some point. When you complete the Work Assignment “Hours required to complete remaining work” is set to zero, then the Work Task will be automatically set to the Work Done. Pease look at the date and time here. [Work Assignments] Hope this will help.Thanks
Hi Prabash,I was not able to recreate this one for above scenario. But I got this error message when We have different Miant.Orgs in the WT and Site Settings in the Resource Set up. [Could you please check this as well].Try below test plan. Create a Work Task with Site 1 Maint Org XXX. Create a Resource and in Maintenace/Service Tab Site Settings define Site as 1 and Maint.Org YYY. Add a Resource Demand for the above task and select the LOV. Above Resource is visible in the LOV but when selecting and saving, the system will give that validation. So, as you said there was an issue with this one. So, RnD have done some correction for this one in 23R2 SU4.Thanks
Hi Prabhash,Let me check.Thanks
Hi,Could you please attach some screen shots? then we might be able to get more idea about this one.Thanks
Hi,It says Maintenance/Service specific site setting. I think you have missed that one. It will be used in both Maintenance and Service area.IFS Cloud DocumentationHope this will help for you.Thanks
@PubudikaW Do we have an update on document in 23R2 about that?
Hi,Below are the prerequisites that should be followed.No open work orders, work tasks or work task steps for the moving Serial Object or the child objects. Serial Parts of the moving serial object and child objects should exist in the new site. Serial Objects with direct connections to meter invoice lines, service/request contracts, service requests or service quotations are not allowed to move. Serial objects included in a service/request contract with Use line on structure can be moved to different site or a parent provided there is no ongoing work through the service/request contract and PM actions generated through service contracts are obsoleted. Scrapped Serial Objects are not allowed to move. Serial Objects with current position "In Inventory" cannot be moved. Cannot move the Serial Object if there is an equipment object with the same object ID exists in the new site.Move Serial Object to a new equipment structure in same site,The current position for the serial object must be
Hi, As per my knowledge we do not have any other way to get Work Type when we are creating WO from CRO. In the WO preparing stage we can decide what Work Type should added in to this WO.Thanks
Hi,Basically, A Work Task template assists as a template for PM action creation. If we generate a PM action from the work task template, the information will be copied to the work order generated from the PM action.Also, the Work task template can be connected to PM actions, WO or service requests through the Jobs and Templates. But when we are connecting WTT to the existing WO, it will not override any details on the WO. But all information on the WO will be inherited by the WT which is created from the WTT.Thanks
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.
